Comparison of the reproducibility of two cervical vertebrae maturation methods

Aim: Facial orthopaedic treatments based on the stimulation or restrictions of craniofacial bone growth are more effective when carried out during the pubertal growth spurt. The aim of this cross-sectional study was to evaluate the reproducibility of two cervical vertebrae methods (CVM) with manual tracing and direct visual inspection. Methods: A sample of 60 lateral cephalometric radiographs (10 of each of the 6 CVM stages) was randomly selected from 171 records. 5 orthodontists classified these radiographs according to the skeletal maturation stage in 2002 and 2005, and the application of both methods was conducted by direct visual inspection and evaluation through manual tracing. Results: The average reliability of the two methods determination and the two forms of evaluation was substantial. The direct visual inspection evaluation showed the highest reliability and agreement interexaminer values for both methods, as well as the intraexaminers evaluation. Conclusion: The reproducibility of CVM method was substantial, indicating its clinical use to determine the skeletal maturity and the ideal moment for treatment execution

Synthesis of a chitosan nanoparticle suspension and its protective effects against enamel demineralization after an in vitro cariogenic challenge.

OBJECTIVE: Our study aims to synthesize, characterize, and determine the effects of a ChNPs suspension on human enamel after cariogenic challenge via pH-cycling. METHODOLOGY: ChNPs were synthesized by ion gelation and characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering. Forty enamel blocks were divided into four groups (n=10/group): (i) ChNPs suspension; (ii) chitosan solution; (iii) 0.05% sodium fluoride (NaF) solution; and (iv) distilled water. Specimens were exposed to cariogenic challenge by cycling in demineralization solution (3 h) and then remineralized (21h) for 7 days. Before each demineralization cycle, the corresponding solutions were passively applied for 90 s. After 7 days, specimens were examined for surface roughness (Ra) and Knoop hardness (KHN) before and after the cariogenic challenge; % KHN change (variation between initial and final hardness), and surface topography by an optical profilometer. The data were analyzed by repeated-measures ANOVA, One-way ANOVA, and Tukey tests (α=0.05). RESULTS: TEM images showed small spherical particles with diameter and zeta potential values of 79.3 nm and +47.9 mV, respectively. After the challenge, all groups showed an increase in Ra and a decrease in KHN values. Optical profilometry indicated that ChNPs- and NaF-treated specimens showed uneven roughness interspersed with smooth areas and the lowest %KHN values. CONCLUSION: The ChNPs suspension was successfully synthesized and minimized human enamel demineralization after a cariogenic challenge, showing an interesting potential for use as an oral formulation for caries prevention.

A higiene bucal de bebês edêntulos e sua influência na microbiota bucal: os profissionais de saúde devem preconizá-la? ­ revisão crítica / Oral hygiene in edentulous infants and its influence on oral microbiota: should the health professionals recommend it? ­ a critical review

Introdução: A indicação de higiene bucal em bebês edêntulos entre os profissionais de saúde ainda é controversa, sendo necessária a busca científica sobre esta indicação e a padronização da informação. Objetivo: Investigar criticamente as evidências relacionadas a indicação da higiene bucal para bebês edêntulos. Métodos: A busca de artigos foi realizada nas bases de dados PubMed, LILACS e Google Scholar, de modo a avaliar a seguinte pergunta: "A higienização da cavidade bucal de bebês edêntulos pode influenciar a microbiota bucal?". Uma busca em 8 livros de Odontopediatria também foi realizada. Resultados: Foram encontrados 317 artigos (167-PubMed, 146-Google Scholar e 4-LILACS). Não foram encontrados estudos primários que avaliaram o efeito da higiene bucal em bebês edêntulos na microbiota, impossibilitando a condução de revisão sistemática. Assim, para a revisão foram incluídos 6 estudos que investigaram micro-organismos na cavidade bucal de bebês edêntulos e o papel das imunoglobulinas salivares. Dentre os livros avaliados, somente 4 indicaram a higiene bucal em bebês edêntulos. Conclusão: Diante dos dados analisados, não existem estudos primários que avaliaram o efeito da higienização na microbiota bucal de bebês edêntulos. Torna-se relevante a condução de estudos clínicos para obtenção de evidências científicas sobre a indicação ou não da higienização da cavidade bucal de bebês edêntulos.

Introduction: The indication of oral hygiene in edentulous babies is still controversial among health professionals, being necessary the search of this recommendation and the standardization of information. Objective: To inves-tigate critically the evidence related to the indication of oral hygiene for edentulous babies. Methods: The search for articles was performed in the PubMed, LILACS and Google Scholar databases, in order to assess the following question: "Can oral cavity hygiene of edentulous babies influence oral microbiota?" A search in 8 books of Pediatric Dentistry was also performed. Results: 317 articles were found (167-PubMed, 146-Google Scholar and 4-LILACS). There were no primary studies that evalu-ated the effect of oral hygiene of edentulous infants on microbiota, which impair the conduction of a systematic review. Thus, it was included for this review six studies that investigated microorganisms in the oral cavity of edentulous infants and the role of salivary immunoglo- bulins. Among the textbooks evaluated, only 4 indicated the oral hygiene in edentulous infants. Conclusion:According to the data, there are no primary studies that assessed the effect of oral hygiene in the oral microbiota of edentulous babies. It is relevant to conduct clinical studies in order to obtain scientific evidence about the indication or no of the oral hygiene in edentulous babies

Weight-loss and surface roughness of enamel after microabrasion procedure with different agents / Perda de peso e rugosidade da superfície do esmalte após procedimento de microabrasão com diferentes agentes

Introduction: Enamel microabrasion is achieved by abrasion of the enamel surface and it is a quick, practical and efficient procedure. Objective It was assessed the weight loss and surface aspect of enamel after microabrasion procedures with commercial and mixtures made in-office. Material and method Eighty bovine incisors were divided into four groups (n=10): OpalustreTM (6.6% HCl + silicon carbide); Whiteness RMTM (6% HCl + silicon carbide); 37% H3PO4 + pumice and 10% HCl + pumice. Treatment was performed by 15 applications of 10s duration. The enamel weight loss was determined by the difference in weight before and after the microabrasion. The surfaces were analyzed by a surface roughness equipment and scanning electron microscopy. Data were submitted to paired-T test, one-way ANOVA and Tukey tests (α=0.05). Result It was observed significantly weight loss for all groups. The difference in weight loss ranged from 0.037±0.012 for group 37% H3PO4 and from 0.054±0.009 for group 6,6% HCl. There was a significant increase in surface roughness for all groups and 10% HCl group showed the lower results (0.65±0.09). It was observed different patterns of enamel morphology by SEM images. Conclusion The in-office mixtures resulted in the lowest enamel structure loss (37% H3PO4) and the lowest surface roughness (10% HCl).

Introdução: A microabrasão do esmalte é realizada através da abrasão da superfície do mesmo, apresentando-se como um procedimento rápido, prático e eficiente. Objetivo Avaliar a perda de peso e o aspecto superficial do esmalte após procedimentos de microabrasão com agentes comerciais e não comerciais. Material e método Oitenta incisivos bovinos foram divididos em quatro grupos (n = 10): OpalustreTM (6,6% HCl + carboneto de silício); Whiteness RMTM (6% HCl + carboneto de silício); 37% H3PO4 + pedra-pomes e 10% HCl + pedra-pomes. O tratamento foi realizado em 15 aplicações de 10s de duração. A perda de peso do esmalte foi determinada pela diferença de peso antes e depois da microabrasão. As superfícies foram analisadas por equipamento de rugosidade superficial e microscopia eletrônica de varredura. Os dados foram submetidos ao teste T-pareado, ANOVA one-way e teste de Tukey (α = 0,05). Resultado Foi observada perda de peso significativa para todos os grupos, a diferença na perda de peso variou de -0,037±0,012 para o grupo 37% H3PO4 a -0.054±0.009 para o grupo 6.6% HCl. Houve um aumento significativo na rugosidade da superfície para todos os grupos e o grupo 10%HCl apresentou os resultados mais baixos (0,65±0,09). Foram observados diferentes padrões de morfologia do esmalte por meio de imagens MEV. Conclusão Os agentes não comerciais resultaram na menor perda de estrutura do esmalte (37% H3PO4) e na rugosidade superficial (10% HCl).

Synthesis of a chitosan nanoparticle suspension and its protective effects against enamel demineralization after an in vitro cariogenic challenge

Abstract Objective Our study aims to synthesize, characterize, and determine the effects of a ChNPs suspension on human enamel after cariogenic challenge via pH-cycling. Methodology ChNPs were synthesized by ion gelation and characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering. Forty enamel blocks were divided into four groups (n=10/group): (i) ChNPs suspension; (ii) chitosan solution; (iii) 0.05% sodium fluoride (NaF) solution; and (iv) distilled water. Specimens were exposed to cariogenic challenge by cycling in demineralization solution (3 h) and then remineralized (21h) for 7 days. Before each demineralization cycle, the corresponding solutions were passively applied for 90 s. After 7 days, specimens were examined for surface roughness (Ra) and Knoop hardness (KHN) before and after the cariogenic challenge; % KHN change (variation between initial and final hardness), and surface topography by an optical profilometer. The data were analyzed by repeated-measures ANOVA, One-way ANOVA, and Tukey tests (α=0.05). Results TEM images showed small spherical particles with diameter and zeta potential values of 79.3 nm and +47.9 mV, respectively. After the challenge, all groups showed an increase in Ra and a decrease in KHN values. Optical profilometry indicated that ChNPs- and NaF-treated specimens showed uneven roughness interspersed with smooth areas and the lowest %KHN values. Conclusion The ChNPs suspension was successfully synthesized and minimized human enamel demineralization after a cariogenic challenge, showing an interesting potential for use as an oral formulation for caries prevention.

TiF4 varnish protects the retention of brackets to enamel after in vitro mild erosive challenge.

The effect of fluoride agents on the retention of orthodontic brackets to enamel under erosive challenge is little investigated. The aim of this study was to evaluate the effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) agents on the shear bond strength of brackets to enamel and on the enamel microhardness around brackets under erosive challenge. Brackets were bonded to bovine incisors. Five groups were formed according to fluoride application (n=10): TiF4 varnish, TiF4 solution, NaF varnish, NaF solution and control (without application). The specimens were submitted to erosive challenge (90 s cola drink/2h artificial saliva, 4x per day for 7 days). Solutions were applied before each erosive cycle and varnishes were applied once. Vickers Microhardness (VHN) was obtained before and after all cycles of erosion and the percentage of microhardness loss was calculated. Shear bond strength, adhesive remnant index and polarized light microscopy were conducted after erosion. The data were analyzed by ANOVA, Tukey, Kruskal-Wallis and Mann-Whitney U tests (α=0.05). The %VHN had no statistically significant differences among the experimental groups. However, considering the comparisons of all groups with the control group, TiF4 varnish showed the highest protection from enamel demineralization (effect size of 2.94, while the effect size for the other groups was >2.4). The TiF4 varnish group had significantly higher shear bond strength compared to other groups. There was no difference among groups for adhesive remnant index. Polarized light microscopy showed higher demineralization depth for the control group. Application of NaF and TiF4 agents during mild erosive challenge minimized the enamel mineral loss around brackets, however only the experimental TiF4 varnish was able to prevent the reduction of shear bond strength of brackets to enamel.

Qual material possui maior longevidade em molares decíduos: resina composta ou cimento de ionômero de vidro? - revisão sistemática da literatura / Which material has the highest longevity in primary molars: composite resin or glass ionomer cement? - a systematic review of the literature

Introdução: Diversos materiais restauradores são indicados para a restauração de dentes decíduos posteriores, como amálgama, resina composta, cimento de ionômero de vidro convencional, cimento de ionômero de vidro modificado por resina e resinas compostas modificadas com poliácidos (compômeros). Entretanto, uma dúvida ainda persiste quanto ao desempenho clínico do cimento de ionômero de vidro, em decorrência de suas propriedades, para ser utilizado como material restaurador definitivo em molares decíduos. Objetivo: Realizar uma revisão sistemática da literatura acerca da taxa de sobrevivência de restaurações realizadas em molares decíduos utilizando resina composta e cimento de ionômero de vidro, buscando com base em evidências científicas, responder a PICO question: "Qual material possui maior longevidade em molares decíduos: resina composta ou cimento de ionômero de vidro?". Material e métodos: Para este fim foram realizadas buscas em duas bases de dados, PubMed e Web of Science, utilizando uma estratégia de busca previamente determinada, para selecionar artigos de acordo com critérios de inclusão e exclusão criados para esse trabalho por dois examinadores calibrados. Resultados: A seleção dos artigos foi realizada de acordo com o fluxograma do PRISMA e foi criada uma tabela para avaliação qualitativa dos artigos selecionados. Foram encontrados 398 artigos na base de dados PubMed e 375 na Web of Science, sendo 153 coincidentes em ambas. Quarenta e seis artigos foram selecionados para leitura completa, dentre eles 42 foram excluídos, e quatro artigos foram incluídos para esta revisão. Conclusão: Os artigos desta revisão demonstraram que a resina composta possuiu maior longevidade em molares decíduos comparada aos cimentos de ionômero de vidro. Porém futuros estudos clínicos necessitam ser conduzidos para comprovar qual o material mais indicado para restaurá-los, já que os cimentos de ionômero modificados por resina mostraram taxas de sobrevivência clínica satisfatórias.

Introduction: Several restorative materials are indicated for restoration of posterior deciduous teeth, such as amalgam, composite resin, conventional glass ionomer cement, resin modified glass ionomer cement and composite resins modified with polyacids (compomers). However, a doubt still persists related to the clinical performance of the glass ionomer cements to be used to restore deciduous molars, due to its properties. Objective: To perform a systematic review of the literature about the survival rate of composite resin and glass ionomer cement restorations performed in deciduous molars aiming scientific evidence to answer the PICO question: "Which material has greater longevity in deciduous molars: resin composite or glass ionomer cement?" Material and methods: The research was performed on two databases, PubMed and Web of Science, using a predetermined search strategy to select articles according to the inclusion and exclusion criteria, evaluated by two calibrated examiners. Results: The selection of the articles was carried out according to the PRISMA flowchart and a table was created for the qualitative evaluation of the included articles. It was found 398 articles in the PubMed database and 375 in the Web of Science, 153 of which were coincident in both. Forty-six articles were selected for complete reading, 42 of which were excluded, and four articles were included in this review. Conclusion: The articles investigated in this review demonstrated that composite resin has a higher longevity in deciduous molars compared to glass ionomer cements. However, future clinical studies are needed to attest which material is better to restore them, since the resin modified glass ionomer cements showed satisfactory clinical survival rates.

TiF4 varnish protects the retention of brackets to enamel after in vitro mild erosive challenge

Abstract The effect of fluoride agents on the retention of orthodontic brackets to enamel under erosive challenge is little investigated. Objective: The aim of this study was to evaluate the effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) agents on the shear bond strength of brackets to enamel and on the enamel microhardness around brackets under erosive challenge. Methods: Brackets were bonded to bovine incisors. Five groups were formed according to fluoride application (n=10): TiF4 varnish, TiF4 solution, NaF varnish, NaF solution and control (without application). The specimens were submitted to erosive challenge (90 s cola drink/2h artificial saliva, 4x per day for 7 days). Solutions were applied before each erosive cycle and varnishes were applied once. Vickers Microhardness (VHN) was obtained before and after all cycles of erosion and the percentage of microhardness loss was calculated. Shear bond strength, adhesive remnant index and polarized light microscopy were conducted after erosion. The data were analyzed by ANOVA, Tukey, Kruskal-Wallis and Mann-Whitney U tests (α=0.05). Results: The %VHN had no statistically significant differences among the experimental groups. However, considering the comparisons of all groups with the control group, TiF4 varnish showed the highest protection from enamel demineralization (effect size of 2.94, while the effect size for the other groups was >2.4). The TiF4 varnish group had significantly higher shear bond strength compared to other groups. There was no difference among groups for adhesive remnant index. Polarized light microscopy showed higher demineralization depth for the control group. Conclusions: Application of NaF and TiF4 agents during mild erosive challenge minimized the enamel mineral loss around brackets, however only the experimental TiF4 varnish was able to prevent the reduction of shear bond strength of brackets to enamel.

Effects of erosive challenge on the morphology and surface properties of luting cements / Efeito do desafio erosivo na morfologia e propriedades de superfície de agentes cimentantes

Introduction: Few studies investigated the surface properties of luting cements after erosive challenge. Objective: To evaluate the surface roughness (Ra), Vickers hardness (VHN) and morphology of 4 luting cements after erosive challenge. Material and method: Twenty specimens of each cement were prepared (4×2mm) and divided into experimental (erosive challenge) and control (artificial saliva) groups (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) and Zinc phosphate (ZnP). The erosive challenge was performed by four daily erosive cycles (90s) in a cola drink and 2 h in artificial saliva over 7 days. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was analyzed by scanning electron microscopy (SEM). ANOVA, Tukey and Student-T tests were used (α=0.05). Result: After erosion, all luting cements had increase in Ra values and U200 and ZnP groups had the highest %VHN. After saliva immersion, only U200 and ZnP groups had significant increases in Ra values and there were no significant differences among the groups in %VHN. SEM analysis showed that Ketac and ZnP groups had rough and porous surfaces, and U200 group had higher resin matrix degradation than ARC group. Conclusion: Erosive challenge with a cola drink affected the surface properties of all luting cements.

Introdução: Poucos estudos investigaram as propriedades de superfície de cimentos após desafio erosivo. Objetivo: Avaliar a rugosidade da superfície (Ra), dureza Vickers (VHN) e morfologia de superfície de 4 cimentos após desafio erosivo. Material e método: Vinte amostras de cada cimento foram preparadas (4×2mm) e divididas em grupo experimental (desafio erosivo) e controle (saliva artificial) (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) e Fosfato de Zinco (ZnP). O desafio erosivo foi realizado com quatro ciclos erosivos diárias (90s) em bebida à base de cola e 2h em saliva artificial durante 7 dias. As leituras de Ra e VHN foram realizadas antes e após erosão. A porcentagem de perda de dureza (%VHN) foi obtida depois da erosão. A morfologia de superfície foi analisada por microscopia eletrônica de varredura (MEV). Foram utilizados testes de ANOVA, Tukey e T-Student (α=0,05). Resultado: Após a erosão, foi observado aumento dos valores de Ra em todos os cimentos testados, e os grupos U200 e ZNP tiveram a maior %VHN. Após imersão em saliva, apenas os grupos U200 e ZnP tiveram aumento significativo nos valores de Ra e não houve diferenças significativas entre os grupos quanto à %VHN. A análise em MEV mostrou que os grupos Ketac e ZNP apresentaram superfícies rugosas e porosas, e o grupo U200 apresentou maior degradação da matriz comparado ao grupo ARC. Conclusão: O desafio erosivo com bebida a base de cola afetou as propriedades de superfície de todos os cimentos.

In vitro effects of erosive challenge on the surface properties of sealants

To assess in vitro the surface roughness (Ra), Vickers hardness (VHN) and surface morphology of resin and glass ionomer materials used for sealants after dynamic erosive challenge. Methods: Twenty specimens of each material were prepared and divided into experimental (erosive challenge) and control groups (n=10): Protect Riva (SDI), Opallis Flow (3M ESPE), Fluroshield (Dentsply), Filtek Z350 XT Flow (3M ESPE). The erosive challenge was performed 4 times per day (90 s) in cola drink and for 2 h in artificial saliva for 7 days. The control specimens were maintained in artificial saliva. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was evaluated by scanning electron microscopy (SEM). The data were analyzed by ANOVA, Tukey and paired t tests (á=0.05). Results: After erosion and saliva immersion, there was an increase in Ra values for all groups and Riva group showed the highest Ra values. After erosive challenge, Riva and Filtek groups showed significant decrease in VHN values, but Filtek group showed the greatest %VHN. For all groups there was inorganic particle protrusion and matrix degradation after erosion visualized by SEM images. Conclusions: Erosive challenge affected the surface properties of all materials used as sealants, particularly in the Riva and Filtek groups...

Brazilian primary school teachers' knowledge about immediate management of dental trauma

OBJECTIVE: To assess the level of knowledge of primary school teachers in the public school network of Northeastern Brazil with respect to management of dental trauma and its relationship with prognosis. METHODS: A questionnaire was applied to 195 school teachers of public schools in Northeastern Brazil. The questionnaire comprised 12 objective questions about dental trauma and methods for its prevention and management. Data were submitted to chi-square test and Poisson regression test (P > 0.05). RESULTS: Out of the 141 teachers who responded the questionnaires, the majority were women (70.2%) and most of them had experienced previous dental accidents involving a child (53.2%). The majority (84.4%) had incomplete college education and few were given some training on how to deal with emergency situations during their undergraduate course (13.5%) or after it (38.3%). Their level of knowledge about dental trauma and emergency protocols showed that unsatisfactory knowledge level was associated with the male sex: 46% higher for men in comparison to women (P = 0.025). CONCLUSIONS: Approximately half of teachers evaluated had unsatisfactory knowledge about dental trauma and emergency protocols, with female teachers showing more knowledge than men. .

OBJETIVO: avaliar o nível de conhecimento de professores de escolas primárias na rede pública de ensino na região nordeste do Brasil, no que diz respeito ao manejo do paciente traumatizado e sua relação com o prognóstico. MÉTODOS: aplicou-se um questionário a 195 professores da rede pública de ensino da região nordeste do Brasil. O questionário continha 12 questões objetivas sobre os traumatismos dentários e seus métodos de prevenção e manejo. Após obtenção dos dados, esses foram submetidos ao teste qui-quadradro e ao teste de regressão de Poisson (p > 0,05). RESULTADOS: dos 141 professores que responderam o questionário, a maioria era composta pelo sexo feminino (70,2%) e a maior parte já vivenciara algum episódio de acidente com criança (53,2%). A maioria (84,4%) possui ensino superior incompleto e poucos foram contemplados com manobras de urgência na graduação (13,5%) ou após essa (38,3%). Os resultados da regressão para o nível de conhecimento sobre traumatismos dentários e protocolo de urgência em relação às variáveis explanatórias do estudo demonstraram que o conhecimento insatisfatório foi associado ao sexo masculino, sendo 46% maior para os homens (p = 0,025). CONCLUSÃO: aproximadamente metade dos professores possui conhecimento insatisfatório sobre traumatismos dentários e protocolo de urgência, sendo que os professores do sexo feminino apresentaram maior conhecimento do que os do sexo masculino. .

In vitro cytotoxicity of self-curing acrylic resins of different colors

OBJECTIVE: The aim of this study was to assess the in vitro cytotoxicity of acrylic resins of different colors over time. METHODS: Specimens were divided into 4 groups (n = 6) according to the color of the acrylic resin (Orto Class, Clássico, Campinas, São Paulo, Brazil): Group 1: clear acrylic resin; group 2: pink acrylic resin; group 3: blue acrylic resin and group 4: green acrylic resin. All specimens were fabricated according to the mass manipulation technique and submitted to mechanical polishing protocol. The control was performed with an amalgam specimen (C+), a glass specimen (C-) and cell control (CC). Specimens were immersed in Minimum Eagle's Medium (MEM) and incubated for 24 h at 37o C. The extracts from the experimental material were filtered and mixed with L929 fibroblast. Cytotoxicity was evaluated at 4 different times, 24, 48, 72 and 168 h. After contact, cells were incubated for 24 h and added to 100 µ of 0.01% neutral red dye. The cells were incubated for 3 h for pigment incorporation and fixed. Cells viability was determined by a spectroscopic (BioTek, Winooski, Vermont, USA) with a 492-nm wavelength λ=492 nm). RESULTS: There were no statistical differences between the experimental groups and the CC and C- groups. CONCLUSION: Clear, pink, blue and green self-curing acrylic resins fabricated by means of the mass manipulation technique and mechanically polished are not cytotoxic. Neither the pigment added to the self-curing acrylic resin nor the factor of time influenced the cytotoxicity of the material. .

OBJETIVO: avaliar, in vitro, a citotoxicidade de resinas acrílicas autopolimerizáveis, de diferentes cores, ao longo do tempo. MÉTODOS: os corpos de prova foram divididos em quatro grupos (n = 3), de acordo com a cor da resina acrílica utilizada (Orto Class, Clássico, São Paulo/SP), sendo: grupo 1, acrílica incolor; grupo 2, acrílica rosa; grupo 3, acrílica azul; e, grupo 4, acrílico verde. Todos os corpos de prova foram confeccionados pela técnica de massa e polidos mecanicamente. Um corpo de prova de amálgama, um de vidro e célula constituíram o controle positivo (C+), controle negativo (C-), e controle de célula (CC), respectivamente. Em seguida, esses foram imersos em meio mínimo essencial de Eagle (MEM) por 24h, quando se removeu o sobrenadante e colocou-os em contato com fibroblastos L929. Avaliou-se a citotoxicidade em quatro períodos: 24, 48, 72 e 168h. Após o contato com o meio, as células foram incubadas por 24h e adicionou-se 100µ do corante vermelho neutro a 0,01%. Posteriormente, as células foram incubadas por 3h, para incorporação do corante, e fixadas. A contagem das células viáveis foi realizada em espectrofotômetro (BioTek, Winooski, EUA), com um comprimento de onda de 492nm (λ = 492nm). RESULTADOS: não houve diferença estatística entre os grupos experimentais e os grupos CC e C-. CONCLUSÇÕES: as resinas acrílicas autopolimerizáveis incolor, rosa, azul e verde, manipuladas pela técnica de massa e polidas mecanicamente não são citotóxicas. O corante utilizado em resinas autopolimerizáveis e tempo não influenciam na citotoxocidade do material. .

Histological analysis of biocompatibility of ionomer cements with an acid-base reaction.

The purpose of this study was to evaluate the inflammatory and cure events of acid-based reactions using glass ionomer cement used for cementation of crowns, bridges, onlays and orthodontic bands implanted in subcutaneous tissue, at different time intervals. A total of 48 male Wistar rats were used, distributed into 4 groups (n = 12), as follows: Group C (control, polyethylene), Group ME (Meron), Group KC (Ketac Cem) and Group PR (Precedent). The animals were sacrificed after time intervals of 7, 15 and 30 days, and their tissues were analyzed under an optical microscope for such events as inflammatory infiltrate, edema, necrosis, granulation tissue, multinucleated giant cells, young fibroblasts and collagen. The results was assessed using Kruskal-Wallis and Dunn's tests (p < 0.05). In the initial period, intense inflammatory infiltrate was observed for all the materials with no significant difference among them (p = 0.104). Groups PR and KC showed significant difference in relation to Group C, at 7 days (p = 0.025) and 15 days (p = 0.006). Edema and giant cells were more expressive in Group ME, differing significantly from Groups C (p = 0.023) and KC (p = 0.039), respectively, at 7 days. Group ME showed a statistically significant difference in relation to Groups PR and KC for the presence of young fibroblasts (p = 0.009) and for collagen (p = 0.002), at 7 days. Within the limits of this in vivo study, Precedent and Ketac Cem glass ionomer cements showed better tissue healing with a greater number of fibroblasts and collagen, as compared to Meron.

In vitro effects of nano-hydroxyapatite paste on initial enamel carious lesions.

PURPOSE: The purpose of this study was to analyze the protective effect of remineralizing agents on enamel caries lesions using surface Knoop microhardness testing (KHN) and atomic force microscopy (AFM). METHODS: Forty-eight human enamel blocks were assigned to four groups (N=12): (1) control (without agent); (2) fluoride varnish (Duraphat); (3) nano-HAP paste (Desensibilize Nano P); and (4) casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (MI Paste Plus). Incipient caries-like lesions were artificially developed. Cariogenic challenge (pH-cycling) was performed for seven days. The pastes were applied before each immersion in demineralization solution, and the varnish was applied only once. KHN values were obtained at baseline, after incipient enamel lesion, and after challenge. The percentage of surface hardness recovery (%SMHR) was performed, and the surface morphology was evaluated by atomic force microscopy (AFM). ANOVA, Tukey's, and student paired t tests were applied at P<.05. RESULTS: After the cariogenic challenge, the nano-HAP group showed significantly higher KHN and %SMHR values than varnish. The CPP-ACP group showed no increase in KHN. The nano-HAP group showed, via AFM, a protective layer formation with globular deposits on the surface. CONCLUSION: SMHR and AFM morphology revealed that nano-hydroxyapatite paste showed a protective effect against in vitro enamel caries development.

Anteroposterior and Vertical Changes in Skeletal Class II Patients Treated With Modified Thurow Appliance

The aim of this study was to evaluate the post-treatment anteroposterior and vertical alterations in skeletal Class II malocclusion with different maxillary patterns in patients treated with modified Thurow appliance. Forty-five patients (22 girls and 23 boys) with skeletal Class II and angle SN.GoGn ≤ 35 and different maxillary patterns (n=15), as follows: retrusive (SNA<80°), normal (SNA=80°- 84°) or protrusive (SNA>84°) maxilla; mean age 9 years at pre-treatment (T1) and 9 years and 10 months at post-treatment (T2), were treated with modified Thurow cervical traction appliance, with expander screw and extraoral face bow with 10° to 20° fold in relation to the intraoral arch. Force of 500 gf was applied and use for 12 to 14 h/day, with fortnightly adjustments. Analysis of variance ANOVA followed by post-hoc Tukey and Kruskal-Wallis test, followed by Mann-Whitney were used (α=5%). In changes obtained from stage T1 to T2, no statistically significant differences were found among the groups Protrusive, normal and retrusive maxilla for the variables SNB, SN.GoGn, 1.NA, overjet, overbite and Class II discrepancy (right and left) (p>0.05). Angular measurements SNA and ANB in the protrusive maxilla group were significantly greater than in the normal and retrusive maxilla groups (p<0.01). However, in the normal maxilla group these values did not differ significantly from those of the retrusive maxilla group (p>0.05). Within the limits of this study, it may be concluded that the modified Thurow cervical traction appliance was efficient for the correction of skeletal Class II irrespective of the maxillary pattern. The mandible had no significant rotation during treatment.

O objetivo deste estudo foi avaliar as alterações verticais e ântero-posterior pós-tratamento da maloclusão Classe II esquelética com diferentes padrões maxilar de pacientes tratados com aparelho Thurow modificado. Quarenta e cinco pacientes (22 meninas e 23 meninos) com Classe II esquelética e ângulo SN.GoGn≤35 e diferente padrão maxilar (n=15),sendo: maxila retrusiva (SNA<80°), normal (SNA= 80°-84°) ou protrusiva (SNA>84°) e idade média de 9 anos no pré-tratamento (T1) e 9 anos e 10 meses no pós-tratamento (T2), foram tratados com aparelho Thurow modificado de tração cervical com parafuso expansor e arco facial externo com dobra de 10° a 20° em relação ao arco interno. Foi empregado a força de 500 gf e uso de 12 a 14 h/dia, com ajustes quinzenais. Análise de variância ANOVA seguido pelo teste post-hoc de Tukey e o teste de Kruskal-Wallis seguido por Mann-Whitney foram empregados (p<0.05). Nas mudanças obtidas da fase T1 para T2, não foram encontradas diferenças estatísticas entre os grupos maxila protusiva, normal e retrusiva para as variáveis SNB, SN.GoGn, 1.NA, overjet, overbite e discrepância de classe II (direita e esquerda) (p>0.05). As medidas angulares SNA e ANB no grupo maxila protusiva foi significativamente maior do que nos grupos maxila normal e retrusiva (p<0.01). Entretanto, esses valores no grupo maxila normal não diferiram do grupo maxila retrusiva (p>0.05). Dentro dos limites do estudo, pode-se concluir que o aparelho de Thurow modificado de tração cervical foi eficiente na correção da Classe II esquelética independente do padrão maxilar. A mandíbula não teve rotação significativa durante o tratamento.

In Vitro Effects of Nano-hydroxyapatite Paste on Initial Enamel Carious Lesions.

PURPOSE: The purpose of this study was to analyze the protective effect of remineralizing agents on enamel caries lesions using surface Knoop microhardness testing (KHN) and atomic force microscopy (AFM). METHODS: Forty-eight human enamel blocks were assigned to four groups (N=12): (1) control (without agent); (2) fluoride varnish (Duraphat); (3) nano-HAP paste (Desensibilize Nano P); and (4) casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (MI Paste Plus). Incipient caries-like lesions were artificially developed. Cariogenic challenge (pH-cycling) was performed for seven days. The pastes were applied before each immersion in demineralization solution, and the varnish was applied only once. KHN values were obtained at baseline, after incipient enamel lesion, and after challenge. The percentage of surface hardness recovery (%SMHR) was performed, and the surface morphology was evaluated by atomic force microscopy (AFM). ANOVA, Tukey's, and student paired t tests were applied at P<.05. RESULTS: After the cariogenic challenge, the nano-HAP group showed significantly higher KHN and %SMHR values than varnish. The CPP-ACP group showed no increase in KHN. The nano-HAP group showed, via AFM, a protective layer formation with globular deposits on the surface. CONCLUSION: SMHR and AFM morphology revealed that nano-hydroxyapatite paste showed a protective effect against in vitro enamel caries development.

In vitro effect of calcium nanophosphate and high-concentrated fluoride agents on enamel erosion: an AFM study.

BACKGROUND: Calcium nanophosphate paste can provide ions to remineralize enamel. There are, however, no data available about the remineralizing effect of this paste on the prevention of enamel erosion, when compared with highly concentrated fluoride agents. AIM: To analyze the effect of calcium nanophosphate paste, fluoride gel, and varnish to protect against enamel erosion using surface Knoop hardness (KNH) and atomic force microscopy (AFM). DESIGN: Forty enamel blocks (4 × 4 mm) of third molars were used for 4 groups (n = 10): 1.23% fluoride gel (Fluorgel-DFL(®) ); calcium nanophosphate paste (Desensibilize NanoP-FGM(®) ); fluoride varnish (Duraphat-Colgate(®) ) and control (without agent). The specimens were immersed in cola drink for 5 min and 2 h in artificial saliva, 4× per day for 5 days. The agents were applied before the first erosive cycle. KNH values were obtained before and after the erosive challenge. The surface morphology was evaluated by AFM. anova, Tukey's, and T-Student tests were applied. RESULTS: After erosion, no significant difference was found for KNH among gel, nanophosphate, and varnish groups; however, they showed higher KNH than control group. Gel and nanophosphate paste showed a protective layer formation on enamel surface by AFM. CONCLUSIONS: The calcium nanophosphate paste showed similar protection against enamel erosion compared with high-concentrated fluoride agents, even containing lower fluoride concentration.

Protective effect of calcium nanophosphate and CPP-ACP agents on enamel erosion.

The aim of this study was to assess the effect of different remineralizing agents on enamel microhardness (KHN) and surface topography after an erosive challenge. Forty-eight human enamel specimens (4 × 4 mm) were randomly assigned to 4 groups: control (no treatment), fluoride varnish, calcium nanophosphate paste and casein phosphopeptide-amorphous calcium phosphate paste (CPP-ACP). Both pastes were applied for 5 minutes, and fluoride varnish, for 24 h. Four daily erosive cycles of 5 minutes of immersion in a cola drink and 2 h in artificial saliva were conducted for 5 days. KHN readings were performed at baseline and after 5 days. The percentage of enamel hardness change (%KHN) was obtained after erosion. The surface topography was evaluated by atomic force microscopy (AFM). The data were tested using ANOVA, Tukey's and paired-T tests (p < 0.05). After an erosive challenge, there was no statistically significant difference between the control (96.8 ± 11.4 KHN / 72.4 ± 3.0%KHN) and the varnish (91.7 ± 14.1 KHN / 73.4 ± 5.5%KHN) groups. The nanophosphate group showed lower enamel hardness loss (187.2 ± 27.9 / 49.0 ± 7.9%KHN), compared with the CPP-ACP group (141.8 ± 16.5 / 60.6 ± 4.0%KHN), and both were statistically different from the varnish and the control groups. AFM images showed a rough surface for the control and the varnish groups, a non-homogeneous layer with globular irregularities for CPP-ACP, and a thick homogeneous layer for the nanophosphate group. None of the agents provided protection against the development of erosion; however, nanophosphate paste was able to reduce enamel surface softening after the erosive challenge.

Protective effect of calcium nanophosphate and CPP-ACP agents on enamel erosion

The aim of this study was to assess the effect of different remineralizing agents on enamel microhardness (KHN) and surface topography after an erosive challenge. Forty-eight human enamel specimens (4 × 4 mm) were randomly assigned to 4 groups: control (no treatment), fluoride varnish, calcium nanophosphate paste and casein phosphopeptide-amorphous calcium phosphate paste (CPP-ACP). Both pastes were applied for 5 minutes, and fluoride varnish, for 24 h. Four daily erosive cycles of 5 minutes of immersion in a cola drink and 2 h in artificial saliva were conducted for 5 days. KHN readings were performed at baseline and after 5 days. The percentage of enamel hardness change (%KHN) was obtained after erosion. The surface topography was evaluated by atomic force microscopy (AFM). The data were tested using ANOVA, Tukey's and paired-T tests (p < 0.05). After an erosive challenge, there was no statistically significant difference between the control (96.8 ± 11.4 KHN / 72.4 ± 3.0 %KHN) and the varnish (91.7 ± 14.1 KHN / 73.4 ± 5.5 %KHN) groups. The nanophosphate group showed lower enamel hardness loss (187.2 ± 27.9 / 49.0 ± 7.9 %KHN), compared with the CPP-ACP group (141.8 ± 16.5 / 60.6 ± 4.0 %KHN), and both were statistically different from the varnish and the control groups. AFM images showed a rough surface for the control and the varnish groups, a non-homogeneous layer with globular irregularities for CPP-ACP, and a thick homogeneous layer for the nanophosphate group. None of the agents provided protection against the development of erosion; however, nanophosphate paste was able to reduce enamel surface softening after the erosive challenge.

Fluoride release/uptake from different orthodontic adhesives: a 30-month longitudinal study.

The aim of this study was to test the null hypothesis that there is no difference in fluoride release between resin-modified glass ionomer cements (RMGICs) and composites in the long term. The materials were divided into 5 groups: a nonfluoride-releasing composite - Group TXT (Transbond XT), a fluoride-releasing composite - Group QC (Quick-Cure), and three RMGICs - Groups FOLC, FOB and MC (Fuji Ortho LC, Fuji Ortho Band, and Multi-Cure). Fluoride release was measured at time intervals of 1 h, 1, 7, 14, 21 and 29 days, followed by further evaluations performed at 6, 12, 18, 24 and 30 months using selective ion electrodes connected to an ionic analyzer. Fluoride releasing and re-releasing experiments were analyzed using the Kruskal-Wallis test and Mann-Whitney test with the Bonferroni correction. The amount of fluoride released by FOB was larger in comparison with the other adhesives (p=0.01). In the long-term, FOLC and MC had a similar performance (p>0.05). The composites presented a low fluoride release, but fluoride ion uptake and re-release capacity of QC was statistically significant (p<0.05) during the experiment. In conclusion, the null hypothesis was rejected, the RMGIC Fuji Ortho Band and the composite Quick-Cure presented greater fluoride release and re-release capacity when recharged.